InterScanTM Messaging Security Virtual Appliance - Online Help ...

Performing Administrative Tasks
4. To configure connections from specific POP3 servers, do the following:
a. Click Add under Dedicated POP3 Connections. The Dedicated POP3
Connection window appears.
b. Type the port IMSVA uses for incoming POP3 connections, the POP3 server
IP address, and the POP3 server port number.
c. Click OK.
d. To modify an existing connection, click the connection name.
5. Under Message Text, modify the message that IMSVA sends to users if email
messages that they are trying to receive trigger a filter and are quarantined or
deleted.
6. Click Save.
Note: The incoming port on your scanners must be idle or the IMSVA daemon might not
function properly.
Configuring POP3 generic services
For a generic POP3 service, the POP3 client logs on using the USER command and
specifies the actual POP3 server and optional port number along with the user's name
using the UserServerSeparator character to separate the values.
Example 1: To connect user "User1" to server "Server1", and the UserServerSeparator
character is "#", the client issues the following USER command:
USER User1#Server1
Example 2: To connect to port 2000 on Server1, the following command is used:
USER User1#Server1#2000
Note: If you do not specify a port number, IMSVA uses the default value of 110.
The following example shows how to configure generic POP3 settings for Outlook:
1. Specify the POP3 server address with IMSVA scanner IP 192.168.11.147.
2. Type user name test123#192.168.11.252.
28-13