Spot Vital Signs LXi Directions for Use - Frank's Hospital Workshop
Spot Vital Signs LXi Directions for Use - Frank's Hospital Workshop
Spot Vital Signs LXi Directions for Use - Frank's Hospital Workshop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 Introduction Welch Allyn <strong>Spot</strong> <strong>Vital</strong> <strong>Signs</strong> <strong>LXi</strong><br />
Warnings and Cautions<br />
General Warnings<br />
Familiarize all operating personnel with the general safety in<strong>for</strong>mation in this summary.<br />
Specific warnings and cautions are also found throughout this manual.<br />
A warning statement in this manual identifies a condition or practice, which if not<br />
corrected or discontinued immediately, could lead to patient injury, illness, or death.<br />
These warnings pertain to the entire <strong>Spot</strong> <strong>Vital</strong> <strong>Signs</strong> <strong>LXi</strong> device.<br />
WARNING The in<strong>for</strong>mation in this manual is a comprehensive guide to the<br />
operation of <strong>Spot</strong> <strong>LXi</strong>. For best results, read this manual thoroughly be<strong>for</strong>e using<br />
the device.<br />
WARNING <strong>Spot</strong> <strong>LXi</strong> is designed <strong>for</strong> medical clinician use. Although this manual<br />
may illustrate medical spot-check techniques, only a trained clinician who knows<br />
how to take and interpret a patient’s vital signs should use this device.<br />
WARNING <strong>Spot</strong> <strong>LXi</strong> is not intended <strong>for</strong> use in environments that are without<br />
health care practitioner supervision.<br />
WARNING <strong>Spot</strong> <strong>LXi</strong> is not intended <strong>for</strong> continuous monitoring. Do not leave<br />
the device unattended while taking measurements on a patient.<br />
WARNING To ensure data integrity, save readings and clear the <strong>Spot</strong> <strong>LXi</strong> display<br />
between patients.<br />
WARNING The <strong>Spot</strong> <strong>LXi</strong> is not defibrillator proof.<br />
WARNING <strong>Spot</strong> <strong>LXi</strong> is not intended <strong>for</strong> use during patient transport.<br />
WARNING This device is not suitable <strong>for</strong> use in the presence of a flammable<br />
anesthetic mixture with air or oxygen or nitrous oxide. An explosion may result.<br />
WARNING To ensure patient safety, use only accessories and supplies (i.e.,<br />
cuffs, hoses, temperature probes, SpO 2 sensors, etc.) recommended <strong>for</strong> or<br />
supplied with <strong>Spot</strong> <strong>LXi</strong>. Using unapproved accessories with <strong>Spot</strong> <strong>LXi</strong> can affect<br />
patient and/or operator safety.<br />
WARNING Take care to prevent water or other fluid from entering any<br />
connectors on the device. Should this occur, dry the connectors with warm air.<br />
Check the accuracy of all operating functions.<br />
WARNING Every three months, inspect the blood pressure cuff, SpO 2 cable,<br />
and other accessories <strong>for</strong> fraying or other damage. Replace as necessary.<br />
WARNING Do not use <strong>Spot</strong> <strong>LXi</strong> on patients who are on heart/lung machines.<br />
WARNING Electric shock hazard. There are no user-serviceable parts inside<br />
<strong>Spot</strong> <strong>LXi</strong> other than battery replacement (see “Battery Replacement” on<br />
page 65). An operator may only per<strong>for</strong>m maintenance procedures specifically<br />
described in this manual. For service, refer the device to an Authorized Service<br />
Center.<br />
WARNING This device is not intended <strong>for</strong> hand-held use during operation.