Test Plan for Optical Grooming Switches - Light Reading

More documents

Recommendations

Info

Test Plan for Optical Grooming Switches Within Table 1 (Configuration A) if any of the SONET/SDH interfaces types are not available, they should be replaced with the nearest equivalent interface in order to maintain connectivity between nodes. Test Methodology A 10 day test window has been deliberately set to assess the most important functions of each switch. It is not proposed to fully test all possible permutations of interface and protection. The proposed test plan will sufficiently test a sample of the permutations in order to: • Gain confidence that the equipment performs as expected. • Assess the user-friendliness of the equipment and network management system. • Assess the operational procedures required. • Understand the flexibility of the switches. The test plan is broken into blocks of sub tests, each sub test having an expected result. The tests within the blocks will be performed in order but the blocks themselves are designed so they can be performed in a different order or even in parallel if required. Process if major failure during testing. The flow chart in figure 7 shows the process to be followed if a major problem is found during testing. 14
Major problem during BTexact testing BTexact Contacts Supplier Supplier requests halt to testing Supplier fixes problem in bl i Yes Yes Continue with test plan Figure 7: Flow Diagram of BTexact procedure on major failure. No No Test Plan for Optical Grooming Switches Continue testing with bl Yes State impact No Stop test plan consider rescheduling 15
Page 1 and 2: Test Specification Issue 2.1 (25 Ju
Page 3 and 4: Published by BTexact Technologies -
Page 5 and 6: Introduction Test Plan for Optical
Page 7 and 8: Test Plan for Optical Grooming Swit
Page 11 and 12: 4 OC-48s over a WDM Test Plan for O
Page 13: Client Interface Name LON#5 STM-16
Page 19 and 20: Expected result: • SONET/SDH test
Page 21 and 22: Other comments: None END OF BLOCK 1
Page 23 and 24: Other comments: None Current route
Page 27 and 28: Protection route. Available resour
Page 37 and 38: SONET/S DH tester NE TCM- No 1 A SO
Page 41 and 42: J0 should remain unaltered. Test Pl
Page 45 and 46: Any other comments: None Test Plan
Page 51 and 52: BLOCK 15. STM-64 MS-SPRING tests TC
Page 57 and 58: BT Commercial Contact: name address
Page 63 and 64: 12. BT Testing Services Test Plan f
Page 65 and 66:
Schedule 1: Personal Non- Disclosur
show all

Test Plan for Optical Grooming Switches - Light Reading

Create successful ePaper yourself

Delete template?

Save as template?