FTA Manual.pdf - Industrial Air

Installation
3.4 Protection against corrosion
63 9810.0156 – Rev.04 –12/01/2007
Location of the device must be done in accordance
with CE standards to ambients that air current exists.
Physical life of the boiler is 10 years according to
related laws. This period contains service and providing
required spare part duration for executing the functions.
The boiler was produced in accordance with EN
303-1, EN 303-2 and EN 303-3
Caution! Combustion air must not contain elements
that will cause to corrosion. As an example, these gases
are water steams of solution and cleaning substances or
gases in spray boxes.
As boiler of floor heating system which does not
have oxygen insulation in accordance with DIN 4726 is
mounted, exchanger must be used to separate the
installation.
3.5 Demands related with heating system water
To prevent the damages occured as a result of
corrosion in installation, quality of heating water must be as
good as drinking water. Unsuitable waters containing
chemical additive substances or causing to corrosion must
not be used.
16 www.baymak.com.tr