FTA Manual.pdf - Industrial Air

Safety
2. Safety
63 9810.0156 – Rev.04 –12/01/2007
Danger! Please pay attention to safety rules below.
Otherwise you may risk lifes both yours and others
2.1 Convenient Usage According to Conditions
2.2 General Safety Cautions
For operations with back pressure, these boilers are
equivalent to DIN EN 303 / 304, DIN 4702 section 7.
Danger! Please take into considirations the cautions
on the boiler. Wrong operation of the boiler causes serious
damages.
Applications of first start-up, setting, maintenance
and cleaning must only be done by authorized service.
When breakdowns occur in the heating system,
system must be shut down. Damaged components must be
changed by authorized service stations.
The accesories in the system must be suitable to
technical rules, components in question must be approved
by manufacturer relating to Baymak boiler.
Connections sealed with bolt paint must not be
pulled out by a person who is not expert or member of
service! These seals prove that bolts which is necessary
for perfect and safe operation has not been changed. If
seals get damage, boiler will be out of warranty!
6 www.baymak.com.tr