FTA Manual.pdf - Industrial Air

6.2 Temperatures of Installation Water
63 9810.0156 – Rev.04 –12/01/2007
Operating/First Start Up
Attention; In this section, essential temperature of
installation is explained for exact and suitable working of
your device. It is very important to match to these
temperatures. Problems occured at the cicumstances
steaming from improper apllications such as liquefying,
chimney, corrosion is out of warranty. Manufacturer
company is not responsible for problems that may occure.
IMPORTANT WARNING ! FOR GAS FUELS
Attention; Minimum boiler inlet water
temperature for gas fuels is limited as 55 °C,
maximum boiler outlet water temperature is limited as
85 °C. Boilers can not be operated out of limits
mentioned. Mentioned inlet water temperatures are
valid in case of shunt pump usage.
IMPORTANT WARNING ! FOR FLUID FUELS;
Minimum boiler inlet water temperature for flue
fuels is limited as 55 °C, maximum boiler outlet water
temperature is limited as 85 °C. Boilers can not be
operated out of limits mentioned. Mentioned inlet water
temperatures are valid in case of shunt pump usage.
FLUID FUEL
USAGE
GAS FUEL
USAGE
Min. Boiler Inlet
Water Temp. o C 55 o C 55 o C
Min. Boiler Outlet
Water Temp. o C 85 o C 85 o C
Attention: Temperature of Boiler inlet must not go down
under 55 o C (Section 5.4.) Otherwise boiler is out of
warranty.
41