warning - Whirlpool
warning - Whirlpool
warning - Whirlpool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. To remove the 24 volt transformer:<br />
a) Disconnect the two wire connectors<br />
from the wire harness.<br />
b) Remove the two hex-head screws and<br />
remove the transformer.<br />
24V Transformer Screws<br />
Connectors<br />
6. To remove the main control board:<br />
a) Remove the three hex-head screws<br />
from the power switch bracket and move<br />
the bracket out of the way.<br />
3 Power Switch<br />
Bracket Screws<br />
4-13<br />
b) Disconnect the six wire connectors from<br />
the control board.<br />
c) Press in on the locking tab and lift<br />
the control board off each of the five<br />
standoffs.<br />
Standoff<br />
Locking Tab<br />
P8 P4 P3 P6<br />
Main Control Board<br />
P5 P7<br />
Continued on the next page.
Change language