warning - Whirlpool
warning - Whirlpool
warning - Whirlpool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
REMOVING THE FREEZER DRAWER SWITCH<br />
WARNING<br />
Electrical Shock Hazard<br />
Disconnect power before servicing.<br />
Replace all parts and panels before<br />
operating.<br />
Failure to do so can result in death or<br />
electrical shock.<br />
1. Unplug refrigerator or disconnect power.<br />
2. Remove the freezer drawer (see page<br />
4-20 for the procedure).<br />
Freezer Drawer Switch<br />
3. Remove the two hex-head screws from<br />
the freezer drawer switch housing and<br />
remove the housing.<br />
Screws<br />
Actuator<br />
Freezer Drawer<br />
Switch Housing<br />
4-21<br />
4. Disconnect the two wires from the freezer<br />
drawer switch terminals.<br />
Freezer Drawer<br />
Switch Wires<br />
Locating Tab<br />
5. Push the freezer drawer switch out of the<br />
housing cutout.<br />
REASSEMBLY NOTE: When you install the<br />
switch in the housing, make sure that you position<br />
it with the locating tab and actuator as<br />
shown.<br />
Actuator<br />
Locating Tab
Change language