warning - Whirlpool
warning - Whirlpool
warning - Whirlpool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ADJUSTING THE FREEZER DOOR<br />
1. Unplug refrigerator or disconnect power.<br />
NOTE: This adjustment allows you to level<br />
the freezer door with the cabinet surface to<br />
prevent leakage and frost from occurring.<br />
Keep Edges<br />
Parallel<br />
Alignment<br />
Holes<br />
+<br />
+<br />
Freezer<br />
Door<br />
8-2<br />
2. Pull the freezer drawer out.<br />
3. Remove the food from the drawer.<br />
4. Lift the liner out of the freezer drawer.<br />
5. Remove the bottom T-15 screw from both<br />
sides of the the freezer drawer front.<br />
6. Close the freezer drawer and adjust the<br />
door front so that it is properly aligned and<br />
the gasket seats evenly against the cabinet.<br />
NOTE: The cabinet trims may need to be<br />
removed to view the door seal.<br />
7. Without moving the freezer drawer front,<br />
slowly open the freezer drawer, and locate<br />
one of the holes in the left and right four<br />
hole groupings that are properly aligned.<br />
8. Install the two screws you removed in step<br />
5, in the left and right aligned holes, and<br />
tighten them securely.<br />
9. Close the freezer drawer, and make sure<br />
that the gasket seats securely against the<br />
cabinet.<br />
Freezer Door<br />
Gasket<br />
Bottom Screw<br />
4 Alignment Holes<br />
(Right Side)