warning - Whirlpool
warning - Whirlpool
warning - Whirlpool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
REMOVING THE WATER FILTER HOUSING<br />
WARNING<br />
Electrical Shock Hazard<br />
Disconnect power before servicing.<br />
Replace all parts and panels before<br />
operating.<br />
Failure to do so can result in death or<br />
electrical shock.<br />
1. Unplug refrigerator or disconnect power.<br />
2. Turn off the water supply to the refrigerator.<br />
3. Remove the water filter from the bottom<br />
of the refrigerator.<br />
4. Remove the two screws from the base<br />
grille and remove the grille from the bottom<br />
of the refrigerator.<br />
Screw Base Grille Water Filter Screw<br />
4-31<br />
5. Remove the water valve (see page 4-30<br />
for the procedure).<br />
6. Remove the two hex-head screws from<br />
the front of the water filter mounting<br />
bracket.<br />
Water Filter Mounting Bracket<br />
7. Pull the water filter housing forward as<br />
far as it will go, then disconnect the water<br />
inlet tube from the filter housing, and remove<br />
the housing from the refrigerator.<br />
Water Inlet Tube Filter Housing