warning - Whirlpool
warning - Whirlpool
warning - Whirlpool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REMOVING THE BIMETAL, DEFROST<br />
HEATER, AND EVAPORATOR<br />
WARNING<br />
Electrical Shock Hazard<br />
Disconnect power before servicing.<br />
Replace all parts and panels before<br />
operating.<br />
Failure to do so can result in death or<br />
electrical shock.<br />
1. Unplug refrigerator or disconnect power.<br />
2. Remove the freezer drawer (see page<br />
4-20 for the procedure).<br />
3. Remove the ice bin and storage drawer<br />
from the freezer.<br />
Ice Bin Storage Drawer<br />
Center Divider<br />
4-27<br />
4. Remove the two front left and right side<br />
hex-head screws from the center divider.<br />
5. Loosen the two rear hex-head slotted<br />
screws, then pull the divider forward and<br />
remove the keyhole slots from the screws.<br />
Remove the divider from the liner.<br />
Front Screw<br />
Center Divider<br />
(Right Side View)<br />
Hex-Head<br />
Slotted Screw<br />
6. Disconnect the receiver board wire connector.<br />
Center Divider<br />
Receiver Board<br />
Wire Connector<br />
Continued on the next page.
Change language