warning - Whirlpool
warning - Whirlpool
warning - Whirlpool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6. To remove the optics receiver board:<br />
a) Remove the five hex-head screws<br />
from the right divider mounting plate,<br />
and remove the plate and slide.<br />
Right Divider Mounting<br />
Plate Screws<br />
4-25<br />
b) Disconnect the wire connector from<br />
the receiver board wire connector.<br />
Receiver Board<br />
Wire Connector<br />
c) Disconnect the wire connector from<br />
the receiver board pins.<br />
d) Remove the mounting screws from the<br />
receiver board and remove the board.<br />
Receiver Board Connector<br />
Board Screws
Change language