warning - Whirlpool
warning - Whirlpool
warning - Whirlpool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
d) Disconnect the 3-pin connector from<br />
the compressor pins.<br />
e) Disconnect the ground wire from the<br />
compressor terminal.<br />
Ground<br />
Wire<br />
3-Pin<br />
Connector<br />
f) Remove the screw from the chassis<br />
ground wire and remove the inverter.<br />
Ground<br />
Wire &<br />
Screw<br />
9. To remove the condenser fan motor:<br />
a) Remove the hex-head screws from the<br />
fan motor bracket (see the top right<br />
photo).<br />
4-15<br />
Condenser Fan Motor<br />
Bracket Screws<br />
b) Press down on the locking tabs and pull<br />
the wire connector off the fan motor.<br />
c) Remove the speed nut from the blade<br />
and remove the blade from the motor<br />
shaft.<br />
Speed Nut<br />
Connector<br />
d) Remove the two hex-head screws<br />
from the fan motor and remove the<br />
motor from the bracket.<br />
Motor Screws<br />
Continued on the next page.