warning - Whirlpool
warning - Whirlpool
warning - Whirlpool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
REMOVING THE ICE MAKER & FILL TUBE HEATER<br />
WARNING<br />
Electrical Shock Hazard<br />
Disconnect power before servicing.<br />
Replace all parts and panels before<br />
operating.<br />
Failure to do so can result in death or<br />
electrical shock.<br />
1. Unplug refrigerator or disconnect power.<br />
2. Remove the freezer drawer (see page<br />
4-20 for the procedure).<br />
3. Remove the ice bin from the freezer.<br />
Ice Bin<br />
4. To remove the ice maker:<br />
a) Remove the bottom bracket screw<br />
and the two top ice maker screws and<br />
lower the ice maker (see the top right<br />
photo).<br />
4-22<br />
Ice Maker Screws (3)<br />
b) Disconnect the two ice maker connectors<br />
from the wire harness and remove<br />
the ice maker.<br />
NOTE: To replace the thermal fuse inside the<br />
ice maker, refer to Job Aid #4316835, R-66.<br />
Ice Maker Connectors