1747-6.22, Backup Scanner User Manual
1747-6.22, Backup Scanner User Manual
1747-6.22, Backup Scanner User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Glossary 213<br />
Module Status Word (MSW) − This word is M1:s.3401 (where<br />
s=slot number of the BSN) and is used to monitor the status of the<br />
<strong>1747</strong>-BSN itself and its counterpart in the remote system.<br />
Output file − The scanner’s output file that is updated during the<br />
SLC processor output scan.<br />
Remote Chassis − The chassis containing an ASB module and<br />
connected to the local SLC chassis via the RIO link.<br />
Remote Expansion Chassis − A chassis that is connected to a remote<br />
chassis using a <strong>1747</strong>-C9 (91.4 cm [36 in.]) or <strong>1747</strong>–C7<br />
(15.2 cm [6 in.]) cable.<br />
Reset, Adapter Decide − Commands sent by the scanner to a logical<br />
device during an RIO discrete transfer. These commands instruct the<br />
logical device to reset all of its discrete outputs if hold last state is not<br />
selected, or to hold all of its discrete outputs in their last state if hold<br />
last state is selected.<br />
Reset, Adapter Reset − Commands sent by the scanner to a logical<br />
device during an RIO discrete transfer. These commands instruct the<br />
logical device to reset all of its discrete outputs, regardless of the hold<br />
last state selection.<br />
RIO Block Transfer − The exchange of up to 64 words of data<br />
between the scanner and a remote device. RIO block transfers only<br />
occur if you program them in your processor control program.<br />
RIO Discrete Transfer − The exchange of image data between the<br />
scanner and adapter. RIO discrete transfers occur continuously<br />
whenever the scanner and adapter are communicating on the RIO<br />
link.<br />
RIO Link − An Allen-Bradley communication system supporting<br />
high-speed serial transfer of Remote I/O (RIO) control information.<br />
This link consists of one master and one or more slaves.<br />
RIO Link Device − Refers to any Allen-Bradley or licensed third<br />
party product that connects to the RIO link as an adapter or slave<br />
device.<br />
<strong>Scanner</strong> − The Catalog Number <strong>1747</strong>-SN, Remote I/O <strong>Scanner</strong>,<br />
which is the master on the RIO network.<br />
<strong>Scanner</strong> Image − The data table area within the scanner, used to<br />
exchange I/O information between the scanner and all the adapters on<br />
the RIO link. The scanner image is a portion of the SLC processor<br />
image.<br />
Publication <strong>1747</strong>-<strong>6.22</strong>