1747-6.22, Backup Scanner User Manual

Numerics
1/2-slot addressing, 1-13,
5-28
1-slot addressing, 1-12, 5-28
2-slot addressing, 1-11, 5-28,
7-7
A
Access-point address, 4-4
Active device status, 5-22
Adapter, G-1
Adapter image, 1-3, G-1
Advanced Setup menu, 2-3
Agency certification, A-1
ASB module, G-1
ASB module chassis, G-1
Asynchronized data transfer,
4-6
Automatic transfer, 4-1
B
Backplane communication,
4-2
Backplane current
consumption, A-1
Backplane power
requirements, 1-3
Baud rate, 3-1
Baud rate selection, A-1
Baud rate settings, 1-18, 3-2
Bit displacement instructions,
9-18
Block transfer, 1-8, 1-16, 4-2,
5-11, 7-1, G-1
block transfer
throughput, A-9
Block transfer buffer layout,
7-3
Block transfer buffers, 7-5,
7-8
Block transfer failure, 7-16
Block transfer instructions,
9-19
Index
Block transfer modules, 1-14
Block transfer read, 7-1, 7-2,
7-3, G-1
Block transfer write, 7-1, 7-2,
7-4, G-1
C
capturing M0-M1 file data,
B-7
Carrier detect circuit, 8-7
Code ID number, 5-29
Communications attempted
status bit, 5-20
Compare instructions, 9-18
Compatible devices, 1-9
Complementary chassis, 1-10
Complementary device, 5-8
Complementary I/O, 1-9, 1-
11, 1-12, 1-13, 1-16, 5-5,
G-1
Complementary mode, 5-3
Configuration DIP switch,
2-2, 3-1
Configuring complementary
I/O, 1-10
Control buffer layout, 7-9
Control file, 5-10
Control flag definitions, 7-9
Counter instructions, 9-17
D
Data block counters, 6-14
Data Highway Plus switching,
8-1, 8-4, 8-5
Data table transfer time, 8-2
Data transfer, 1-22
Data transfer control word,
4-6, 6-5, 6-6, G-1
Data transfer handshake word,
4-6, 6-6, 6-8, G-1
Data transfer status word, 4-6,
Publication 1747-6.22