Generation C / Génération C - ASCO Numatics

DIMENSIONS - MOUNTING
5,5
MULTIPOL WITHOUT INPUTS
Valve
series
n2
L2
C K2
P2
5,5
P4
B
4 ØF
Standard version
Weight of a Buslink valve island without bus module or input module (kg)
Valve
n2 : number of valves
series 4 6 8 10 12 14 16
569 0,9 1,32 1,73 2,16 2,58 3 3,42
570 (2x3/2) 1,18 1,66 2,14 2,62 3,1 3,58 4,06
570 (5/2-5/3) 1,18 1,66 2,14 2,62 3,1 3,58 4,06
571 1,61 2,31 3,01 3,71 4,41 5,11 5,81
P1
C D K1
2 Ø5,5
VALVE ISLANDS - GENERATION C
ISLAND WITH INPUTS
n1 n2
46
46
5 L1 L2
5,5
The island is provided with four mounting holes in the spool valve subbase and two mounting holes on the left side for the input modules.
The centre distances L1 and L2 are dependent on the number and size of the spool valves (L2) and on the number of additional input
modules (L1); see table below.
Make sure to provide for enough room on the right side for pressure supply and optional exhaust silencers.
Valve
L1 (mm) L2 (mm)
series
n1 : number of input modules n2 : number of valves
Standard version without 1 2 3 4 4 6 8 10 12 14 16
ATEX version without 1 2 3 4 - 4 6 8 10 12 14
569 (M5) 66,5 112,5 158,5 204,5 250,5 91,5 123,5 155,5 187,5 219,5 251,5 283,5
570 (G1/8) 66,5 112,5 158,5 204,5 250,5 105 143 181 219 257 295 333
571 (G1/4) 66,5 112,5 158,5 204,5 250,5 126,5 172,5 218,5 264,5 310,5 356,5 402,5
B C D E ØF K1 K2 P1 P2 P3 (1) P4
Weight of one bus module: 0,550 kg
Weight of one input module: 0,545 kg
Total weight of a BUSLINK Generation C valve island: defi ne the weight of the pneumatic components from the spool valve series
and number of valves required (see above table) + the weight of the bus connection module + the weight of optional input modules
(= 0.545 kg x n1 modules).
E
Overall length
of island
569 (M5) 163 23 47,5 28,5 4,5 60,4 15 3 35 190 150 L2 + 11
570 (G1/8) 163,5 28,3 59 28,5 5,5 60,4 21 3 33 190 150
(MULTIPOL without inputs)
L1 + L2 + 10,5
571 (G1/4) 181,5 34,7 70,5 28,5 5,5 60,4 26 3 31 190 150 (with inputs)
(1) Height P3 is the minimum dimension required for connector and cable mounting mm
All leafl ets are available on: www.asconumatics.eu
10
C K2
P2
B P3
4 ØF
1 In the BUSLINK ATEX version, the position after the last valve is
reserved for the protection module.
BUSLINK ATEX version
Weight of a Buslink valve island without bus module or input module (kg)
Valve
n2 : number of valves
series 4 6 8 10 12 14 15
569 1,25 1,66 2,09 2,51 2,93 3,35 3,42
570 (5/2-5/3) 1,60 2,08 2,56 3,04 3,52 4,00 4,08
571 2,25 2,95 3,65 4,35 5,05 5,75 5,86
00455GB-2007/R01
Availability, design and specifi cations are subject to change without notice. All rights reserved.