Amiko Alien 2 User Manual - Freeviewshop.co.nz
Amiko Alien 2 User Manual - Freeviewshop.co.nz
Amiko Alien 2 User Manual - Freeviewshop.co.nz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Basic Operations<br />
4.4 Powering On/Off<br />
1. Connect the power <strong>co</strong>rd of the product to a wall outlet.<br />
2. Turn on the power switch of the rear panel.<br />
3. Power on/off by pressing the [ POWER] button on the remote <strong>co</strong>ntrol or [ POWER] button on the front<br />
panel.<br />
? Frequently Asked Question<br />
Q: The power of my STB has been turned on and not in Standby mode, but the TV screen showed<br />
nothing:<br />
A: Make sure the TV set has been set to the <strong>co</strong>rrect video input (not the TV channels). For example, if you<br />
have <strong>co</strong>nnected the unit with the Video1 input of the TV set, the TV set has to be switched to Video1.<br />
Q: The power of my STB has been turn on and not in Standby mode, but the TV screen showed nothing<br />
except popup window with “No Signal” information.<br />
A: That means the channel, which you select, is no signal. Check <strong>co</strong>nnection of signal cable or <strong>co</strong>ntact<br />
operator.<br />
11