Amiko Alien 2 User Manual - Freeviewshop.co.nz
Amiko Alien 2 User Manual - Freeviewshop.co.nz
Amiko Alien 2 User Manual - Freeviewshop.co.nz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Networking<br />
option, press [ok] button, then press [▲▼ , ] buttons, at<br />
last press [ok] button. Or press [◄, ►] buttons to select<br />
ON . If not DHCP service, you need select OFF, you need<br />
<strong>co</strong>nfig the network by manual.<br />
In this menu:<br />
Press [P+] button to go to the Video Setting menu.<br />
Press [P-] button to go to the Time Setting menu.<br />
4.6.4 Video Setting<br />
Video setting allow you setting for display format and<br />
resolution.<br />
1. TV Standard: Press [◄, ►] buttons to switch video<br />
resolution circularly by the sequence “480<br />
576 720 1080i1080p Auto”. Or press<br />
[ok] button, and select it with [▲, ▼] buttons, then<br />
press [ok] button to <strong>co</strong>nfirm.<br />
Note:<br />
1) Auto means system will set the video output<br />
resolution ac<strong>co</strong>rding to the program, it’s playing,<br />
different resolution programs switching perhaps<br />
will makes TV screen flickering.<br />
2) When you <strong>co</strong>nnect with A/V or SCART, the<br />
TV has output that only you change to resolution<br />
the TV supports.<br />
2. Screen ratio: Press [◄, ►] button to switch video<br />
details<br />
resolution circularly by the sequence “ 4:3<br />
16:9 Auto. Or press [ok] button, and select it<br />
with [▲, ▼] buttons, then press [ok] button to<br />
<strong>co</strong>nfirm.<br />
4:3: Auto - Letterbox - Centre<br />
16:9: Auto - Pillar Box - Zoom<br />
Auto: The display format follow the channel<br />
3. Conversion: Press [◄, ►] buttons to switch the<br />
manner circularly by the sequence<br />
“ LETTER_BOX PAN_SCAN COMBINED<br />
IGNORE. Or press [ok] button, and select it with [▲,<br />
▼] buttons, then press [ok] button to <strong>co</strong>nfirm.<br />
In this menu:<br />
Press [P+] button to go to the Network Setting menu.<br />
Press [P -] button to go to the Password Setting menu.<br />
4.6.5 Password Setting<br />
Password Setting Change the system password, the<br />
default password is 0000.<br />
In this menu:<br />
Press [P+] button to go to the <strong>co</strong>nfig Setting menu.<br />
Press [P -] button to go to the video Setting menu.<br />
4.6.6 Config Setting<br />
<strong>co</strong>nfig Setting allow you <strong>co</strong>nfig sth about online.<br />
Message auto play: Press [◄, ►] buttons to switch it<br />
between Enable and Disable.<br />
Enable : Allow the message auto play in full screen<br />
when it play video.<br />
Disable: The message can't auto play in full screen<br />
when it play video.<br />
15
Change language