11.11.2013 Views

1930 Cadillac Brochure Front Cover - GM Heritage Center

1930 Cadillac Brochure Front Cover - GM Heritage Center

1930 Cadillac Brochure Front Cover - GM Heritage Center

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

24 CADILLAC OPERATOR'S MANUAL<br />

E Q U I P M E N T 25<br />

Cowl ventilators are also provided on the closed cars to supplement the<br />

ventilation provided by the windshield. These ventilators are at the sides<br />

of the cowl compartment and open toward the rear, serving as outlets for<br />

the air entering under the windshield.<br />

Windshield Cleaner<br />

The windshield cleaner consists of two wiper blades, operated by the<br />

suction or vacuum in the passages between the carburetor and the engine.<br />

The cleaner is controlled by the lower of the two buttons at the extreme<br />

left-hand end of the instrument board. When the button is turned clockwise<br />

as far as it will go the cleaner is shut off. To start the cleaner, turn<br />

the button counter-clockwise.<br />

Adjustable Seat<br />

The driver's seat is adjustable on all <strong>Cadillac</strong> cars, except those that arc<br />

intended to be chauffeur-driven. On open cars, the back of the seat can<br />

be moved forward or backward as desired. This adjustment is controlled<br />

by the handle on the top of the baac of the seat. To move the seat forward,<br />

turn the handle clockwise; to move it backward, turn the handle counterclockwise.<br />

On closed cars, the entire front seat can be moved forward or backward.<br />

This adjustment is controlled by a handle on the center of the seat, about<br />

three inches above the floorboards.To move the seat forward, turn the<br />

handle clockwise; to move it backward, counter-clockwise. The handle<br />

must be turned one-half turn at a time.<br />

As the front scat on the five-passenger coupe is divided, only the driver's<br />

half of the seat is adjustable. The handle for making the adjustment is on<br />

the side of the seat, otherwise the adjustment is the same.<br />

Cigar Lighters and Inspection Lamp<br />

The car is equipped with a combination cigar lighter and inspection<br />

lamp that makes use of a single reel with twelve feet of flexiblecord attached<br />

to the back of the instrument board. The flexiblecord ends in a<br />

bayonet type socket, to which may be attached either the inspection lamp<br />

or the heating clement of the cigar lighter. The method of attachment<br />

is identical with that of an ordinary lamp bulb, Ordinarily the cigar lighter<br />

will be carried in place in the socket on the cord and the inspection lamp<br />

in a stationary socket provided on the front of dash, where it is useful<br />

to illuminate the engine. (The inspection lamp is packed with the tool<br />

equipment when the car is shipped.)<br />

:<br />

i<br />

To use the cigar lighter, pull it out from the instrument board at least<br />

a foot, wait a few seconds for the heating element to heat and apply it<br />

to the cigar or cigarette. The current is automatically switched on as soon<br />

as ten or twelve inches of the cord have been unreeled. To light a pipe,<br />

remove the nickel-plated shield by turning it slightly counter-clockwise<br />

and pulling it straight off.<br />

To lock the cord in any desired position, pull out the button on the<br />

instrument board at the right of the cigar lighter (Fig. 2). This engages<br />

a ratchet which prevents the reel from rewinding. To rewind the cord,<br />

press the button back to ics original position.<br />

The inspection lamp socket on the dash has a double bayonet lock with<br />

two sets of slots. To install the lamp, simply insert it in the socket, press<br />

in, and turn it clockwise as soon as the pins on the lamp engage the first<br />

or outer sets of slots. In this position, the current is not switched on. To<br />

switch the current on, turn the lamp slightly counter-clockwise, press in,<br />

and turn it clockwise again, engaging the pins in the second or inner set<br />

of slots To switch off the light, turn the lamp counter-clockwise and<br />

pull it out of the socket fat enough to engage the first set of slots.<br />

The smoking sets of Sedan models are equipped with a cordless cigar lighter<br />

that can be passed around. To use this lighter, depress the switch on the<br />

side of the lighter, hold it in place until the heating element gees red and lift<br />

the lighter out for use.<br />

Tools<br />

The tools comprising the standard equipment are listed below and are<br />

illustrated in Fig. 11. Items listed opposite Xos. 17, 18 and 19, are not<br />

illustrated.<br />

Hammer<br />

Monkey wrench<br />

Large screw-driver<br />

Pliers<br />

Crescent adjustable wrench<br />

Small screw-driver<br />

Oil can<br />

Spark plug wrench<br />

Starting crank<br />

Hose tor tire air compressor<br />

Grease gun<br />

Rim<br />

Hub<br />

tool<br />

cap wrench<br />

Brace wrench<br />

Jack handle<br />

Jack<br />

Tool bag<br />

Lubrication chart<br />

Operaror's Manual

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!