1930 Cadillac Brochure Front Cover - GM Heritage Center
1930 Cadillac Brochure Front Cover - GM Heritage Center
1930 Cadillac Brochure Front Cover - GM Heritage Center
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
26 CADILLAC OPERATOR'S MANUAL<br />
EQUIPMENT<br />
Tool Compartment<br />
The compartment forthe tool equipment is between the left-hand running<br />
board and the frame, and is accessible upon opening a door in the left-hand<br />
dust shield. The lock on the tool box door is operated by the key for the<br />
package compartments, not by the ignition key.<br />
cnZTJiZlr J h C - L°°L b ° X t OOC , Fi 1 2 b A r<br />
* - « a i "ing rod holds the inner cover<br />
can be unlocked with the package of the tool box in place,<br />
compartment key.<br />
Figurt 12c. The inner cover can be removed after<br />
the retaining rod is dropped down.<br />
To reach the tools, proceed as follows: Insert the key and turn it clockwise<br />
until the lock barrel springs out. The handle can then be turned until<br />
the catches are released, permitting the door to be tilted out at the bottom<br />
and lifted out clear of the dust shield.<br />
Fiyirt 11. The standard tool equipment. See page 25 for the name and use of each tool.<br />
The tools are contained in an inner box, which is held in place by the<br />
rod shown in Fig. 12b. Force this rod out of the depressions in the handles<br />
on the cover of the box, and let the rod drop to the position shown in<br />
Fig. 12c. The cover of the box can then be removed by means of the two<br />
handles.<br />
The door of the battery compartment operates in the same manner as the<br />
tool compartment.