1930 Cadillac Brochure Front Cover - GM Heritage Center

OBUBRaL INFORMATION COHERING
COMPLETE CADILLAO AND LASALLE LINES
While we wish to disouss the three distinot divisions,
Cadillac, LaSalle and Fleetwood of our production in detail
in the following pages, there are certain features
applicable to the complete lines*
Wheels & Axle Ratios
The Cadillac line this year will have standard wood wheels,
with the conventional carrier on the rear for the spare.
The wheels will be 19 n and the tire siae 7.00-19» This
year, we are offering a demountable wood wheel, finished
in natural color in too styles, either oarrying a single wheel
on the rear, or with fender well equipment. When these demountable
wood wheels are specified in the color of the oar,
they will have to be ordered as " special", otherwise, we
shall oonsider orders specifying demountable wood wheels to
be a natural finish. The wire and disc wheels will be finished,
either with single carrier on the rear, or with fender
wells. No proyision has been made for production.to furnish
the oarrier for too wheels on the rear. At a later date, it
is possible that we shall be able to supply some sort of an
adapter through the Parts Department.'
the axle ratios available on Cadillac are standard 5.08-1.
Unless otherwise specified, this will be-used on all models,
with the exception of Roadsters, Two Passenger Coupes and
Convertible Two Passenger Coupe types, where the optional
gear ratio of 4.75-1 is used. Under no consideration should
4.75-1 be specified on either the Five or Seven Passenger
Sedan types.