07.01.2014 Views

CHEM01200604009 Sreejith Kaniyankandy - Homi Bhabha ...

CHEM01200604009 Sreejith Kaniyankandy - Homi Bhabha ...

CHEM01200604009 Sreejith Kaniyankandy - Homi Bhabha ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

73<br />

Grating<br />

Convex Mirror<br />

Concave Mirror<br />

Prism<br />

Figure 2.7. Schematic of Offner Stretcher<br />

2. 8. 2. 3. Multistage Amplification<br />

The amplification is achieved through a two-step process. The first stage is a<br />

regenerative amplifier and the second stage is a multipass amplifier. In both of the<br />

amplification stage Ti-S is used as the gain medium.<br />

The amplifier used in the present study uses a combination of regenerative amplifier<br />

and a multipass amplifier. In a regenerative amplifier the seed pulses from stretcher are<br />

chosen and trapped in a cavity for amplification. This is accomplished by a combination of<br />

optical isolator, Pockels cell and polarizer. For the purpose of amplification of the seed pulse<br />

another laser is required which pumps the gain medium which is Ti-S in the present system.<br />

The pump pulse used in the present system is a diode pumped solid state laser which gives a<br />

power of 20W. The output produced is a second harmonic of Nd:YLF. YLF is naturally<br />

birefringent and can sustain high powers with few kHz repetition rate. The output beam is

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!