HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.

2) WHITE BALANCE : White balance mode
The hue(white balance) of the camera image is adjusted that changes with the various illuminations.
When white subject is captured, the hue is adjusted for the camera image to be white.
• PRST 3200K : The white balance condition is optimized at a color temperature of 3200K.
(Halogen lamp etc.)
• PRST 5600K : The white balance condition is optimized at a color temperature of 5600K.
(Sun light etc.)
• MEMORY (4400K) : White balance is automatically adjusted by the direct mode AWB button.
The approximate standard color temperature is displayed into [ ] after
adjustment.
• AUTO : The white balance condition is set through real time auto white balancing
(Automatic tracking white balance). The adjustment speed can be selected with
SPEED of AUTO WHITE menu.
3) MASTER SAT : The density of color(Chroma) of entire image is adjusted.
The master saturation level can be set in a range of -128 to 127. The color of the entire image will be
light on the –side and dense on the +side. For zero (0) setting, hold down both the L and R buttons for
approx. 2 seconds.
4) MASTER BLACK : Black brightness of the image is adjusted.
It is used when black portions are whitish or black saturations occur.
The master black level can be set in a range of -128 to 127. The black level will be lower on the –side
and higher (whiten) on the +side. For zero (0) setting, hold down both the L and R buttons for approx. 2
seconds.
5) GAIN/SHUTTER : Change to GAIN/SHUTTER menu.
6) DETAIL : Change to DETAIL menu.
15