HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.

More documents

Recommendations

Info

5. ALC ALC is for brightness control functions Auto Iris, AGC and AES. 1) OVER RIDE : Auto iris level setting ALC level setting in range of -128 to 127 (about ±2 F stops). Press R and L for respectively higher or lower video level settings. Press both L and R for about 2 seconds to set to 0. 2) SPEED : AGC and AES response speed • SLOW : Slow response to scene light variations. Allows a stable image when a strong light source. e.g. vehicle headlights, enters the scene. • STANDARD : Normal setting • FAST : Quick response to scene light variations. It is used where variations are sudden, such as changing a microscope magnification. 3) PEAK/AVERAGE : Set auto level control for Peak or Average in 4 steps of 50/50, 25/75, 18/85 or 0/100. At high Average setting, background may be difficult to see in picture bright components. Increasing the Peak setting may render spotlighted components easier to see. 4) ALC GATE : ON/OFF toggle • ON : Video signal of the specified area is detected for controlling AGC, lens and ALC of auto electronic shutter. GATE SELECT is displayed 1 line below and the detection area can be selected. • OFF : Video signal of the entire screen is detected for ALC control. ALC [ FILE1 ] OVER RIDE : 0 SPEED :STANDARD PEAK/AVE :15/85 ALC GATE :ON GATE SEL :MANUAL MANU GATE EDIT:[PUSH R] 20
5) GATE SELECT : ALC gate area setting. (It is displayed only for ALC GATE : ON) User can select pattern arbitrarily from MANUAL mode along with fixed 6 patterns from Mode 1 to Mode 6. Detected Area PATTERN 1 PATTERN 2 PATTERN 3 PATTERN 4 PATTERN 5 PATTERN 6 21
Page 1 and 2: 3-CCD Color Camera HV-HD201 HV-HD20
Page 3 and 4: uilt-in installation such as a book
Page 5 and 6: WICHTIGE SICHERHEITSANWEISUNGEN 1.
Page 7 and 8: 16. Eindringen von Fremdkörpern un
Page 9 and 10: MISES EN GARDE IMPORTANTES 1. Lire
Page 11 and 12: provoquer un feu ou un choc électr
Page 13 and 14: IMPORTANT NOTICE For USA These prod
Page 15 and 16: Standard composition Check when unp
Page 17 and 18: Notes to users Important safety not
Page 19 and 20: Name and function of each section 5
Page 21 and 22: Lens CAUTION Observe the dimensions
Page 23 and 24: Video signal type lens adjustment A
Page 25 and 26: Menu Screen Operation 1. Menu Struc
Page 27 and 28: DETAIL [ FILE1 ] COLOR DETAIL [ FIL
Page 29 and 30: 2) WHITE BALANCE : White balance mo
Page 31 and 32: 2) SHUTTER : Electronic shutter mod
Page 33: 4. DETAIL:DETAIL level setup Contou
Page 37 and 38: 6. AUTO SETUP Menu for initial imag
Page 39 and 40: 10) OTHER FUNCTION : Change to OTHE
Page 41 and 42: 10. SD CARD (It is displayed only w
Page 43 and 44: 12. MASKING Menu for tone adjustmen
Page 45 and 46: 25) RG LINEAR : Color density and h
Page 47 and 48: 13. GAMMA/KNEE Menu for gamma corre
Page 49 and 50: 14. DETAIL Various settings of cont
Page 51 and 52: 15. COLOR DETAIL The amount of an c
Page 53 and 54: 4) WHITE GATE : Sets the gate to ad
Page 55 and 56: 4) SYNC/HDVD SEL : Selects external
Page 57 and 58: 18. ID/TITLE ID and title display p
Page 59 and 60: 19. LENS Menu for setting the lens
Page 61 and 62: 20. OTHER FUNCTION 1) DYNAMIC CHROM
Page 63 and 64: How to Attain Better Images Black b
Page 65 and 66: Error message Procedure AUTO WHITE:
Page 67 and 68: Auto Shading Correction Color shadi
Page 69 and 70: RC-Z3 Remote Control Panel All came
Page 71 and 72: 1 2 3 CONTROL switch ・ON (red LED
Page 73 and 74: Store operation notes: 1. After adj
Page 75 and 76: 23 GAIN switch Sets the camera sens
Page 77 and 78: Connectors MULTI connector (DMSH-15
Page 79 and 80: Y/C connector(TCS-7547-01-401) DC 1
Page 81 and 82: Specifications 1) Mode HDTV modes 1
Page 83 and 84: Input/Output Signals 1. Input signa

HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.

Create successful ePaper yourself

Delete template?

Save as template?