HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.
HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.
HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Input/Output Signals<br />
1. Input signals<br />
1) Synchronization signal input<br />
HDTV Tri-level SYNC : 0.3 Vp-p ±0.1Vp-p (SYNC IN connector)<br />
HDTV HD/VD : 2 to 5 Vp-p (MULTI connector)<br />
Note: External synchronization is possible only with HDTV signal same as video output. It is effective<br />
only when the EXT. SYNC switch is set to IN.<br />
2) Serial data input (REMOTE connector)<br />
1.5 Vp-p ±3 dB/High (RC-Z3)<br />
RS-232C level (PC)<br />
Note: Set back panel RC-232C/RC-Z3 switch according to the connected device.<br />
2. Output signal ratings<br />
1) HD SDI output (SDI OUT connector)<br />
0.8 Vp-p/75Ω<br />
2) Component video output (MULTI connector)<br />
Y : 1.0 Vp-p/75Ω<br />
R-Y: 0.7 Vp-p/75Ω<br />
B-Y: 0.7 Vp-p/75Ω<br />
3) RGB output (MULTI connector)<br />
R: 0.7 Vp-p/75Ω<br />
G: 0.7 Vp-p/75Ω<br />
B: 0.7 Vp-p/75Ω<br />
Note: It becomes G on sync and RGB on sync for HDTV and SDTV mode respectively.<br />
69