HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.
HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.
HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
17. SYSTEM<br />
Menu for settings of image output mode, an external synchronization, and camera control<br />
communication. (The external synchronization of this camera is only for HD TV.)<br />
1) ANALOG OUT SEL: Sets analog signal output mode.<br />
• HD TV : Outputs the analog output signal in HDTV mode.<br />
(Only RGB/YPbPr signal is effective in this mode, there<br />
is no output signal from VIDEO, VBS and YC terminal.)<br />
• SD TV : Outputs the analog output signal in SDTV mode.<br />
There is SDTV picture output signal from VIDEO, VBS<br />
terminal other than RGB/YPbPr signal from multi<br />
connector.<br />
2) RGB/YPbPr : Changes image output from multi connector.<br />
• RGB : Outputs R, G, B signals.<br />
• Y Pb Pr : Outputs Y Pb Pr (Y, R-Y and B-Y) signals.<br />
SYSTEM<br />
ANALOG OUT SEL.:SD TV<br />
RGB/Y Pb Pr :RGB<br />
[EXT. SYNC SW] :INPUT<br />
SYNC/HDVD SEL.:SYNC IN<br />
SYNC IN(BNC) :75 ohm<br />
H PHASE : 0<br />
REMOTE : 9600 bps<br />
MESSAGE RTN :ON<br />
3) EXT. SYNC SW : Displays the state of EXT. SYNC switch of camera back panel.<br />
(It can not be changed form menu.)<br />
• INPUT : EXT. SYNC switch is set to IN. (External signal input mode)<br />
• OUTPUT : EXT. SYNC switch is set to OUT. (External signal output mode)<br />
(If the EXT. SYNC switch is at OUT, the input signal at SYNC IN BNC connector becomes ineffective.)<br />
40
Change language