HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.

4) WHITE GATE : Sets the gate to adjust the white balance for a part of the screen as a subject. The best
balance at the time of real time white balance operation can be controlled by matching the gate to white
and gray in the screen.
• ON : Real time auto white balance operation or memory auto white balance is executed for specified
detection area.
• OFF : A video signal of the entire image is detected for carrying out white balance control.
5) GATE AREA H : Sets horizontal width of detection gate.
To set this value make the WHITE GATE ON and display the detection gate.
• Setting width : 0 to 10
6) GATE AREA V : Sets vertical width of detection gate.
To set this value make the WHITE GATE ON and display the detection gate.
• Setting width : 0 to 7
7) INITIALIZE : Initializes AUTO WHITE menu settings to factory setting.
Press L and R buttons simultaneously for about 2 seconds. (Only the selected scene file is initialized.)
39