HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.

12. MASKING
Menu for tone adjustment of selected color.
There are 6/12 vector [HUE] and [SAT] masking for correction of hue and saturation and [LINEAR]
masking for correction of hue while keeping picture brightness fixed.
The HUE/SAT is adjusted for Red(R), Green(G), Blue(B), Yellow(Y),
Cyan(C) and Magenta(M) in 6 color mode and for natural tint of those
color in 12 color mode. MASK. TYPE setting sets the color mode.
These settings are effective when ON/OFF of MASKING menu is set to
ON.
1) R HUE : Changes hue of red color.
2) Y-R HUE : Changes hue of natural tint of red and yellow.
3) Y HUE : Changes hue of yellow color.
4) G-Y HUE : Changes hue of natural tint of green and yellow.
5) G HUE : Changes hue of green color.
6) C-G HUE : Changes hue of natural tint of cyan and green.
7) C HUE : Changes hue of cyan color.
8) B-C HUE : Changes hue of natural tint of blue and cyan.
9) B HUE : Changes hue of blue color.
10) M-B HUE : Changes hue of natural tint of magenta and blue.
11) M HUE : Changes hue of magenta color.
12) R-M HUE : Changes hue of natural tint of red and magenta.
The above items can be set in the range from -64 to 63. Respectively
press the R button to increase and the L button to decrease the vector
color hue as indicated in the figure. Each item is set to 0 by
simultaneously pressing the L and R buttons for about 2 seconds.
MASKING [ FILE1 ]
[HUE][SAT] [LINEAR]
R : 0 0 R-G: 0
Y-R: 0 0 R-B: 0
Y : 0 0 G-R: 0
G-Y: 0 0 G-B: 0
G : 0 0 B-R: 0
C-G: 0 0 B-G: 0
C : 0 0
B-C: 0 0
B : 0 0 MASK. TYPE: 12
M-B: 0 0 ON/OFF :ON
M : 0 0
R-M: 0 0
INITILIZE :[PUSH L+R] 2SEC
-
+
-
R
Y
G
+
+
-
+
-
+
M
B
C
-
+
-
29