HV-HD201 Op Manual - Hitachi Kokusai Electric America, Ltd.

Error message
Procedure
AUTO WHITE:NG
・ Turn off the color bar.
CHANGE TO CAMERA
TRY AGAIN
AUTO WHITE:NG
・ Set WHITE BALANCE: MEMORY
CHANGE WHITE BALANCE TO
MEMORY
TRY AGAIN
AUTO WHITE:NG
・ White balance cannot be made due to insufficient illumination.
LOW LIGHT
・ Increase the intensity of illumination, turn lens iris toward open direction,
TRY AGAIN
or increase the gain to provide a proper video level.
・ Preass again the AWB switch.
AUTO WHITE:NG
HIGH LIGHT
TRY AGAIN
AUTO WHITE:NG
C.TEMP HIGH
TRY AGAIN
AUTO WHITE:NG
C.TEMP LOW
TRY AGAIN
CAMERA MODE:AUTO
CHANGE TO MANUAL
・ White balance cannot be made due to excess illumination.
・ Increase the intensity of illumination, turn lens iris toward closed
direction, or increase the gain to provide a proper video level.
・ Preass again the AWB switch.
・ The color temperature is too high, making it impossible to reach the
optimum value in adjustment. (If there is no problem in practical
application, use the camera under the current condition.)
・ Add a filter to the lens or illumination to decrease the color temperature.
・ The color temperature is too low, making it impossible to reach the
optimum value. (If there is no problem in practical application, use the
camera under the current condition.)
・ Add a filter to the lens or illumination to increase the color temperature.
・ Set camera mode to manual.
・ Preass again the AWB switch.
51