MA-500TR Instruction Manual - ICOM Canada

More documents

Recommendations

Info

SUPPLIED ACCESSORIES DC power cable (OPC-2059) NMEA connector cable (OPC-2014) • The OPC-2014 has 15 leads, numbered 1 to 15. MXG-5000 gps receiver is included with <strong>MA</strong>-<strong>500TR</strong>. MXG-5000 Cable length: Approx. 10 m (32.8 ft) • An instruction sheet comes with the MXG-5000. Please read it before installing and operating the MXG-5000. Mounting bracket For the mounting bracket Knob bolts Flat washers (M5) Screws (5×20) Spring washers (M5) v
PRECAUTIONS RWARNING! NEVER connect the transponder to an AC outlet. This may pose a fire hazard or result in an electric shock. RWARNING! NEVER connect the transponder to a power source of more than 16 V DC or use reverse polarity. This could cause a fire or damage the transponder. RWARNING! NEVER cut the DC power cable between the DC plug at the back of the transponder and fuse holder. If an incorrect connection is made after cutting, the transponder may be damaged. CAUTION: NEVER place the transponder where normal operation of the vessel may be hindered or where it could cause bodily injury. KEEP the transponder at least 1 m (3.3 ft) away from the vessel’s magnetic navigation compass. DO NOT use or place the transponder in areas with temperatures below –20°C (–4°F) or above +60°C (+140°F) or, in areas subject to direct sunlight, such as the dashboard. DO NOT use harsh solvents such as benzine or alcohol when cleaning, as they will damage the transponder surfaces. If the transponder becomes dusty or dirty, wipe it clean with a soft, dry cloth. BE CAREFUL! The transponder rear panel will become hot when operating continuously for long periods of time. Place the transponder in a secure place to avoid inadvertent use by children. BE CAREFUL! The transponder meets IPX7* requirements for waterproof protection. However, once the transponder has been dropped, waterproof protection cannot be guaranteed because of possible damage to the transponder’s case or the waterproof seal. * Except for the DC power and cloning cable connectors. For U.S.A. only CAUTION: Changes or modifications to this device, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. Approved Icom optional equipment is designed for optimal performance when used with an Icom transponder. Icom is not responsible for the destruction or damage to an Icom transponder in the event Icom transponder is used with equipment that is not manufactured or approved by Icom. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. MarineCommander is a trademark of Icom Incorporated. All other products or brands are registered trademarks or trademarks of their respective holders. vi
Page 1 and 2: INSTRUCTION MANUAL CLASS B AIS TRAN
Page 3 and 4: FCC INFORMATION • FOR CLASS B UNI
Page 5: ABOUT CE • INSTALLATION NOTES The
Page 9 and 10: OVERVIEW 1 D ABOUT AIS AIS is an ac
Page 11 and 12: PANEL DESCRIPTION 2 e UP AND DOWN K
Page 13 and 14: PANEL DESCRIPTION 2 t TARGET BOX Sh
Page 15 and 16: PREPARATION 3 ■ MMSI code setting
Page 17 and 18: PREPARATION 3 ■ Initial setting m
Page 19 and 20: PREPARATION 3 D NMEA Input/Output p
Page 21 and 22: PREPARATION 3 D Name and Call Sign
Page 23 and 24: BASIC OPERATION 4 ■ Display backl
Page 25 and 26: BASIC OPERATION 4 ■ Danger list d
Page 27 and 28: BASIC OPERATION 4 D The detail scre
Page 29 and 30: BASIC OPERATION 4 D The detail scre
Page 31 and 32: OTHER FUNCTIONS 5 ■ Message D Rec
Page 33 and 34: OTHER FUNCTIONS 5 i Push [∫] or [
Page 35 and 36: OTHER FUNCTIONS 5 D Delete a waypoi
Page 37 and 38: MENU MODE OPERATION 6 D CPA/TCPA
Page 39 and 40: MENU MODE OPERATION 6 D GPS Informa
Page 41 and 42: MENU MODE OPERATION 6 • Internal
Page 43 and 44: INSTALLATION AND CONNECTIONS 7 ■
Page 49 and 50: MAINTENANCE 8 ■ Troubleshooting T
Page 51 and 52: MAINTENANCE 8 • Transponder Test
Page 53: TEMPLATE 10 R12 (Max.) 165 (6 1 ⁄
Page 56:
A-6811D-1EX-q Printed in Japan © 2
show all

MA-500TR Instruction Manual - ICOM Canada

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?