Casper Suite Administrator's Guide v8.7 - JAMF Software

d. Click OK.
11. Repeat steps 2 through 10 for each additional partition.
To set up partitioning for a configuration using the JSS:
1. Log in to the JSS with a web browser.
2. Click the Settings tab.
3. Click the Casper Admin link.
4. Create or edit the configuration to partition.
• To create a new configuration, click the New Config button in the toolbar.
To edit an existing configuration, select the configuration in the sidebar.
•
5. Click the Additional Partitions tab.
6. Click the Add New Partition link.
7. Enter a name for the partition, and then enter the size that you want it to be.
8. Enter the maximum percentage space that the partition should take up on the target drive.
9. If you want to deploy a configuration to the partition:
a. Choose "Journaled HFS+" from the Format pop-up menu.
b. Choose the configuration that you want to install.
c. If you want this partition to be re-imaged on subsequent images of the primary partition, select the
Re-image this partition if it already exists option.
d. To append a string to the computer name from the primary partition, enter the computer name in the
Append to Computer Name field.
259