LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>LM</strong> <strong>286</strong><br />
User manual<br />
1.0 SAFETY<br />
1.1 Markings and symbols<br />
All laws, decrees and regulations in effect must be observed in operating<br />
and maintaining the machine.<br />
The safety and operating instructions in the manual must be followed!<br />
The maintenance and adjustment instructions must be observed. Their<br />
observance ensures trouble‐free and safe operation and long economic<br />
operating time.<br />
In the case of a failure that you cannot resolve and eliminate, please<br />
contact <strong>LM</strong> Trac Service.<br />
Stop working immediately if there is the slightest chance of the failure<br />
causing a risk of injury or damage to the machine.<br />
Varoitus! Varning! Warning!<br />
The Warning sign indicates a risk of injury and/or serious material<br />
damage and gives guidance on how to eliminate these risks.<br />
Huomaa! Notera! Note!<br />
The Note sign is used to draw your attention to an issue or action that<br />
gives guidance on the safest and most economic operation of your<br />
machine.<br />
Info!<br />
Info provides you with general information about observing official<br />
regulations in different contexts (waste disposal etc.) and protecting the<br />
machine and the environment during operation and maintenance, etc.<br />
1.2 Safety instructions<br />
The best insurance against accidents is the observance of safety<br />
instructions. Read this section carefully before starting work with the<br />
machine. Every operator, regardless of past experience, must read and<br />
understand this section before using the machine. The machine's owner<br />
must inform operators about these instructions. Store the manual in its<br />
dedicated place.<br />
1.2.1 Before use<br />
• Study the machine and be aware of its limitations. Read the user<br />
manual before starting the machine.<br />
• Follow all the warning and instruction labels found on the machine.<br />
• Do not operate the machine under the influence of alcohol,<br />
medication or intoxicating substances. Fatigue can also be dangerous.<br />
• Check the surroundings before working and installing additional<br />
equipment.<br />
• Do not wear baggy, worn or excessively loose‐fitting clothes. Clothes<br />
can get tangled in rotating parts or controls and cause accidents. Wear<br />
correct protective equipment, i.e. a helmet, safety boots, protective<br />
goggles, hearing protectors, work gloves, etc., as required by<br />
occupational safety regulations.<br />
• Do not allow passengers inside the machine while working.<br />
• Check for wear and the correct adjustment of mechanical parts.<br />
Replace worn and damaged parts immediately. Check the tightness of<br />
bolts and nuts regularly.<br />
Rev. 30.1.2013 02 Safety 5