LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>LM</strong> <strong>286</strong><br />
User manual<br />
5.7.6 Washer fluid level check (6)<br />
The washing fluid tank (A) is located on the right side of the machine<br />
behind the cabin.<br />
Figure 55.<br />
Always ensure that the tank has a sufficient level of fluid. Add<br />
washer fluid in the water. Ensure that the fluid does not freeze<br />
during the cold season.<br />
5.7.7 Lubrication (7)<br />
Lubricate all grease nipples with a grease gun.<br />
► Clean the grease nipples and the tip of the grease gun.<br />
► Press the tip of the grease gun perpendicular to the grease nipple, and apply<br />
a suitable amount of lubricant. The articulated shaft universal joints should<br />
be lubricated until the lubricant is visible underneath all the joint cup seals.<br />
Lubricate all lubrication points:<br />
Figure 56.<br />
1. Front lifter 5 nipples<br />
2. Driving and brake pedal Oil (with an oil can)<br />
3. Door and hatch hinges and locks 8 nipples<br />
4. Rear axles 6 nipples (2WD) 8 nipples (4WD)<br />
5. Tipping platform hinges 2 nipples<br />
► Lubricate all sliding surfaces that do not have a grease nipple using a highquality<br />
well‐penetrating spray lubricant and/or graphite‐based grease.<br />
Rev. 30.1.2013 06 Maintenance 51
Change language