LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>LM</strong> <strong>286</strong><br />
User manual<br />
5.6 Recommended lubricants and volumes<br />
Table: 33<br />
Item Volume Quality<br />
OE<br />
Note:<br />
recommendation<br />
Fuel tank 35 l DIN E590 Diesel DIN E590 Diesel Summer/winter grade must be<br />
used according to prevailing<br />
conditions<br />
Cooling system 9 l Water/glycol 50/50 Water/glycol 50/50 Never use only water<br />
Motor oil 5 l 15W40 API CE Castrol CRD In temperatures below –15 °C<br />
10W/30 use 5W‐30 multi‐grade oil<br />
Hydraulic oil 55 l ISO‐VG46<br />
DIN 51524 part 1<br />
DIN 51502<br />
HLP 46<br />
Washer fluid 1.5 l Water/washer fluid<br />
50/50<br />
Lubrication points<br />
Molybdenum<br />
disulphide grease<br />
* See “Fuel Grades” in this manual.<br />
5.7 Daily maintenance<br />
Perform the following maintenance procedures daily, before starting the<br />
engine.<br />
5.7.1 Indicators and warning lights (1)<br />
Check that all the indicators and warning lights are functioning.<br />
5.7.2 Engine oil level check (2)<br />
Castrol<br />
AWH 46<br />
Water/washer fluid<br />
50/50<br />
Castrol<br />
MS1 GREASE<br />
Air conditioning 0.9 kg R 134A coolant R 134A coolant<br />
Never use only water<br />
Figure 50.<br />
A. Dipstick B. Oil filler neck<br />
When checking the oil level, the machine must be on a level surface. The oil<br />
level must be between the marks on the dipstick.<br />
1. Turn off the engine a few minutes before the check.<br />
2. Pull out the dipstick (A), wipe it clean, and reinsert it for a moment.<br />
3. Pull the dipstick out again and check that the oil level is between the “Max”<br />
and “Min” marks.<br />
4. If necessary, add the recommended oil through the oil filler neck (B) and<br />
recheck the oil level.<br />
Info!<br />
The grade of the oil added must match the oil in the engine.<br />
Rev. 30.1.2013 06 Maintenance 47