LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User manual <strong>LM</strong> <strong>286</strong><br />
3.9 Pedals<br />
Your machine is equipped with a so‐called double action drive pedal (1)<br />
and brake pedal (2).<br />
Figure 22.<br />
The driving direction is selected by pressing either the upper part<br />
(forwards) or lower part (backwards) of the drive pedal. By releasing the<br />
pedal the machine stops due to the fully hydraulic drive power train.<br />
3.9.1 Radio<br />
3.9.2 Heater vents<br />
Figure 23.<br />
The radio is located on the ceiling panel, to the right of the driver. The<br />
radio is provided with its own user manual.<br />
Dome light<br />
The dome light is located above the right door. The switch is located in<br />
the same place. Remember to turn off the dome light before exiting the<br />
cabin.<br />
Figure 24.<br />
Air vents<br />
There are vents in the cabin for both heating and air conditioning. The<br />
vents may be rotated, and their flaps may be turned to the desired<br />
position. The vents may also be closed.<br />
Internal circulation vent<br />
Figure 25.<br />
The internal circulation vent (1) is located to the right of the driver's leg.<br />
Keep the vent normally closed. If you wish to heat the cabin quickly,<br />
open the vent so that the same indoor air is recirculated through the<br />
heater and the cabin heating improves.<br />
The vent must be kept open whenever air conditioning is used.<br />
24 04 Cabin and controls Rev. 30.1.2013
Change language