LM 286 EN 30012013.book - Oy LAIMU Ab

LM 286
User manual
1.1 Machine specifications and type plate
Write the data in the rows below:
Owner:
Address:
____________________________________ __________________________
____________________________________ Tel.: ______________________
Main machine:Serial number: _______________________ Model:____________________
Engine:
Dealer:
Serial number:________________________ Model:____________________
____________________________________ Tel.: ______________________
Spare parts provider: ______________________________ Tel.: ______________________
Maintenance provider: _____________________________ Tel.: ______________________
The machine's type plate (A) is located behind the lower front corner of
the right‐side door to the cabin.
1. Figure
The type plate comprises:
the CE mark and the machine's model, serial number, year of
manufacture, weight, max. total weight, max. axle weights
(front/rear) and engine power.
The serial number is also stamped on the machine's frame
below the fuel tank (B).
Figure 1.
The engine's type plate (C) is located on the right side of the engine's
cylinder block next to the fuel pump.
Figure 2.
The engine's type plate comprises the engine model and serial number.
Rev. 30.1.2013 01 Introduction 3