LM 286 EN 30012013.book - Oy LAIMU Ab

LM 286
User manual
Heater control
This control is used to regulate the amount of water entering the heater core.
Turning the knob to the right increases cabin temperature. Turning the knob all
the way to the left closes water circulation into the heater core.
Air conditioning control
This control is used to adjust the power of the air conditioning. Do not operate
the air conditioning at too a high power in order to avoid over‐cooling the
cabin.
Air conditioning switch
This switch is used to switch the air conditioning on and off. The air
conditioning only operates when the fan is on. Turn the ventilation vents to
direct air upwards, away from the driver’s body.
Seat/mirror heating switch
This switch is used to switch the seat‐ and external mirror heating on and off.
The indicator on the switch illuminates when the heating is switched on.
Remember to turn off the heating when it is no longer required.
Rear window wiper/washer
The switch has three positions:
0) OFF
1) Rear window wiper on
2) Rear window washer on
The switch returns to position 1 when released (spring‐return).
Central hydraulic lubrication switch
The operation of the central hydraulic lubrication system is explained in more
detail in this manual, and in the manual supplied with the system.
3.8 Arm rest, joysticks and pedals
Figure 21.
Joystick movements:
1. Lowering the lifter.
2. Raising the lifter.
3. Cylinder hydraulics uses.
• The hydraulics cylinders connected to the machine (max. 3 pcs) are
controlled by moving the joysticks in question.
4. Front lifter float selection switch (accessory).
6, 7, 8 and 9 are not in use.
Rev. 30.1.2013 04 Cabin and controls 23