LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
LM 286 EN 30012013.book - Oy LAIMU Ab
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User manual <strong>LM</strong> <strong>286</strong><br />
5.7.5 Hydraulic oil level check (5)<br />
The hydraulic oil level is checked from the sight glass (A) of the hydraulic<br />
oil tank provided on the left side of the machine. The oil level must be<br />
visible in the sight glass when the oil is cold.<br />
Figure 53.<br />
When checking the oil level, the machine must be on level ground with<br />
the tools lowered, and the oil must be cool.<br />
Oil can be added through the filler neck (breather cap B) on the left front<br />
corner of the engine compartment, or through the leak oil connector at<br />
pressure.<br />
Figure 54.<br />
When adding oil, ensure that the oil and the area around the filler neck<br />
are clean.<br />
Info!<br />
The grade of the added oil must match the oil in the tank.<br />
The hydraulic oil tank is at an overpressure of 0.35 bar.<br />
See the recommended oil 5.6 on page 47.<br />
50 06 Maintenance Rev. 30.1.2013
Change language