Galileo SOL Manual - Scubapro

2. Menus, settings and functions
MB level. You can set Galileo to warn you
when this happens.
English
During the dive, if you ascend shallower
than a suggested MB stop depth and the
warning is set to either VISUAL or BOTH,
Galileo will show the message MB STOP
IGNORED on the display for 12 seconds
and the depth is shown in inverted colors
(white on a black background) until you
descend below the stop depth or until there
is an MB level reduction (see section 2.6.11
and 3.5.5). The following fi gures show the
actual display in the CLASSIC and FULL
confi gurations.
During the dive, if you ascend more than
1.5m/5ft above a suggested MB stop depth
and the warning is set to either VISUAL
or BOTH, Galileo will show the message
MB LEVEL REDUCED on the display for
12 seconds. In addition, regardless of the
setting of the warning, the new MB level is
displayed in inverted color (white on a black
background) as follows:
- CLASSIC: in the lower left corner after
the text message extinguishes. Alternate
information is accessible as described
in section 3.3.2, but after 5 seconds
the new MB level information is again
shown;
- FULL: in place of the MB level.
The following fi gures show the actual display
in the CLASSIC and FULL confi gurations.
2.6.11 MB level reduced
(default: BOTH)
When diving with an MB level higher than
L0 and in the presence of MB level stops,
if you ascend more than 1.5m/5ft above
the deepest required MB level stop, Galileo
reduces your MB level to the next possible
level. The display will show the new active
31