Galileo SOL Manual - Scubapro
Galileo SOL Manual - Scubapro
Galileo SOL Manual - Scubapro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. Diving with <strong>Galileo</strong><br />
set bearings are kept in the profi le memory<br />
and can be viewed with SmartTRAK after<br />
downloading the dive to a PC.<br />
If you have set a reference bearing, arrows<br />
will appear to the left or to the right of the<br />
numeric bearing indication, to show you in<br />
which direction you should turn in order to<br />
match the set bearing. As an additional aid<br />
in navigation, <strong>Galileo</strong> automatically marks the<br />
positions at 90 and 120 degrees to the left<br />
and to the right of the set bearing, in addition<br />
to the position at 180 degrees (as an aid<br />
for square course, triangular course and<br />
reciprocal course navigation respectively).<br />
These are denoted with ┴ , ∆ and .<br />
The left button (BOOK) still allows you to<br />
set bookmarks.<br />
3.4.2 Setting bookmarks<br />
By pressing the left button (BOOK) you<br />
can set any number of bookmarks as<br />
reminders of particular moments during the<br />
dive. In CLASSIC, FULL and COMPASS<br />
confi gurations, setting a bookmark also<br />
resets the stopwatch.<br />
When you set a bookmark, <strong>Galileo</strong><br />
will display the confi rmation message<br />
BOOKMARK SET (if the safety stop timer<br />
is visible on the display, the message is not<br />
displayed. In FULL and GAUGE display<br />
confi gurations it also does not show, since<br />
the reset of the stopwatch is already an<br />
indication that the bookmark was set<br />
successfully). The bookmarks will appear<br />
on the dive profi le in SmartTRAK.<br />
3.4.3 Safety stop timer<br />
At the end of a dive, at depths of 6.5m/20ft or<br />
shallower and if there are no decompression<br />
obligations, the left button label changes<br />
from BOOK to TIMER (unless the option is<br />
turned OFF, see section 2.3.3).<br />
If SAFETY STOP TIMER in DIVE<br />
SETTINGS is set to AUTOMATIC:<br />
if a minimum depth of 10m/30ft has<br />
been reached during the dive, at a depth<br />
of 5m/15ft the safety stop timer will<br />
automatically start a countdown and a<br />
bookmark will be added to the dive profi le.<br />
If you go below 6.5m/20ft, the timer will<br />
disappear and the no-stop time is shown<br />
again. Upon returning to 5m/15ft, the timer<br />
will start again automatically. As long as<br />
you are shallower than 6.5m/20ft and there<br />
are no decompression obligations, you<br />
can press TIMER to start or restart the<br />
countdown manually.<br />
If SAFETY STOP TIMER in DIVE SETTINGS<br />
is set to MANUAL:<br />
at a depth of 6.5m/20ft and shallower<br />
pressing TIMER will activate the safety<br />
stop timer and add a bookmark to the<br />
dive profi le. You can restart the timer any<br />
number of times. If you go below 6.5m/20ft,<br />
the timer will disappear and the no-stop<br />
time will be shown again. You need to<br />
press TIMER again upon ascending over<br />
6.5m/20ft to restart the timer.<br />
If SAFETY STOP TIMER in DIVE SETTINGS<br />
is set to OFF:<br />
It is not possible to activate the safety stop<br />
timer.<br />
54