OrgPlus 7 User Guide

Working with Charts: Basic Charting
CHAPTER 4
Selecting All Objects of the Same Type
You can select the following sets of objects:
• All: Selects all objects.
• All Assistants: Selects all assistant boxes.
• All Co-managers: Selects all boxes that share the same subordinates.
• All Managers: Selects all boxes to which subordinate or assistant boxes are
attached.
• All Non-managers: Selects all non-manager boxes.
• Direct Reports: Select the boxes at the level immediately below the selected
box.
• Peers: Selects the boxes at the same level as the selected position, which
report to the same manager.
• Branch: Selects all boxes that are descendants of the selected box, as well as
that box.
• Lowest Level: Selects all boxes that are on the lowest displayed level.
• All Locked Boxes: Selects all boxes that are marked as locked.
• All Hidden Boxes: Selects all boxes that are hidden.
• All Connecting Lines: Select all connecting lines between boxes.
• All Hidden Connecting Lines: Selects all the hidden connecting lines.
• All Free Floating Objects: Selects all the free floating objects.
• All Anchored Objects: Selects all the free floating objects that are anchored
to boxes.
• All Multi-record boxes: Select all boxes that are marked as multi-record
boxes.
➣ To select a set of objects:
• Choose Select | from the Edit menu.
Selecting Fields
OrgPlus enables you to select boxes and fields.
➣ To select fields in all boxes:
1 Choose Select Fields from the Edit menu to display the Select Fields dialog box.
Selecting Objects 4-9