OrgPlus 7 User Guide

Troubleshooting
APPENDIX D
Possible Solution
Printing graphics can be slow. You can try printing at lower quality but the output
won’t look as sharp.
Problem
Printing boxes without text.
Possible Solution
• Reset your printer by turning it off and then on. Then try printing again.
• Make sure you can see the text on your screen.
• Make sure you are using the correct printer driver.
See Also: Page Setup, page D-4.
• Your computer may be running low on memory or resources. Close any other
open applications and try again.
See Also: Memory and Resources Problems, page D-7.
Problem
Printing text without boxes.
Possible Solution
• Reset your printer by turning it off and then on.
• If you have chosen not to have box borders, they will not print. See if box
borders are visible on screen.
• Make sure you are using the correct printer driver.
• Your computer may be running low on memory or resources. Close any other
open applications and try again.
Problem
Text is printing outside boxes.
Possible Solution
• Reset your printer by turning it off and then on.
• Make sure you are using the correct printer driver.
• You may be using a font that is not scaling correctly. Try using a TrueType font
such as Arial.
• Your computer may be running low on memory or resources. Close any other
open applications and try again.
Problem
Letters are replaced with symbols.
Printing D-3