OrgPlus 7 User Guide

OrgPlus User Guide
Using Grids and Rulers
Grids and rulers provide a visual aid for the placement of objects on the OrgPlus
page. The lines of the grid crisscross the work surface like those on traditional graph
paper. When you place a free-floating object on the page, it snaps into place
according to its position on the grid.
The rulers along the left and top edges measure the page in inches.
Note: Rulers are especially useful for outputting charts to large format printers and
plotters. Use the Page Setup… menu from the File menu to set the paper size.
Select the Adjust to: radio button and set scaling to 100% to get WYSIWYG output.
Displaying the Grids and Rulers
To display the grid, select Grid from the View menu. To display the rulers, select
Ruler from the View menu.
Note: Grids and rulers do not appear in printed charts.
Working with the Photo Manager
This section describes how to place pictures in box fields using the Photo Manager.
Pictures added using Photo Manager can be synchronized with the original data
source.
Inserting Pictures Using Photo Manager
The Photo Manager can import pictures into chart boxes. The Pictures fields in each
box can be automatically populated from an external source. This is useful if you
maintain a set of pictures with a logical naming convention. These pictures may be
stored on a local or network drive, HTTP or FTP server.
Photo Manager identifies photos according to a flexible naming convention. The same
naming convention must be used for identifying all pictures.
➣ To import/refresh photos to your chart:
1 With your chart open, select Photo Manager from the Data menu. If the chart
has no Pictures fields defined, the following Photo Manager message is
displayed.
6-2 Using Grids and Rulers