User Manual

GETTING STARTED
Chapter
2
Getting Started
Congratulations on your purchase of the DN6000K10PCI
LOGIC Emulation Board! You can begin by installing the
software, or by powering on your DN6000K10PCI. If you
wish to begin installation, please follow the installation
instructions. The remainder of this chapter describes the
contents of the box and how to start using the
DN6000K10PCI LOGIC Emulation Board.
1 Precaution
The DN6000K10PCI is sensitive to static electricity, so treat the PCB accordingly. The
target markets for this product are engineers that are familiar with FPGA’s and circuit
boards, so a lecture in ESD really isn’t appropriate (and wouldn’t be read anyway).
However, the following web page has an excellent tutorial on the “Fundamentals of
ESD” for those of you who are new to ESD sensitive products:
http://www.esda.org/basics/part1.cfm
The DN6000K10PCI has been factory tested and pre-programmed to ensure correct
operation. You do not need to alter any jumpers or program anything to see the board
work. A reference design is included on the enclosed CD. Please verify that the board
is in working order by following the steps below:
2 The DN6000K10PCI LOGIC Emulation Kit
The DN6000K10PCI LOGIC Emulation Kit provides a complete development
platform for designing and verifying applications based on the Xilinx, Virtex-II Pro
FPGA family. The DN6000k10PCI is stand-alone or hosted via a USB interface. The
DN6000K10PCI enables designers to implement embedded processor based
applications with extreme flexibility using IP cores and customized modules. The
DN6000K10PCI User Guide www.dinigroup.com 6