V92TC V92TC DELUXE - Polaris
V92TC V92TC DELUXE - Polaris
V92TC V92TC DELUXE - Polaris
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance<br />
5. Remove the spark plug from the cylinder head with a<br />
spark plug socket.<br />
Both spark plugs should have the same light or<br />
medium tan color deposits on the insulator around the<br />
electrode tip. The spark plug electrode tip and bridge<br />
should have sharp, square edges.<br />
If spark plugs are in good condition and are not due for<br />
replacement, you can clean them with a stiff bristle<br />
brush, set the gap and reinstall them.<br />
Replace spark plugs (NGK CR7EB or equivalent) at the recommended intervals. Always replace<br />
spark plugs in pairs.<br />
6. Set the electrode gap with a spark plug gauge.<br />
Gap: 0.032 inch (0.8 mm)<br />
7. Clean the mating surface on the cylinder head and install the spark plug with a spark plug socket.<br />
Torque: 8 ft -lbs (11 Nm)<br />
8. Reconnect both spark plug wires.<br />
9. Reinstall and tighten the front and rear fuel tank<br />
screws.<br />
Torque: 20 ft -lbs (27 Nm)<br />
10. Reinstall the operator’s seat.<br />
102<br />
0.032 inch<br />
(0.8 mm)
Change language