V92TC V92TC DELUXE - Polaris

Operation
Starting the Engine
The Victory motorcycle has a starter interlock system. The engine can be started only when the transmission
is in neutral, or when the transmission is in gear and the clutch is disengaged.
Follow these steps to start the motorcycle:
1. Unlock the steering lock (see page 29).
2. Perform the Pre -Operation Check (beginning on page 45). If you are carrying cargo, inspect cargo
restraints for tightness.
3. Insert the ignition key into the ignition switch and turn the switch to the On position (see “Ignition
Switch” page 30).
4. Mount the motorcycle and bring it to an upright position. Engage the front brake and place the
sidestand in the stored (up) position. If the neutral indicator is not illuminated, shift the transmission
to neutral (see “Shifting Gears” page 62).
5. If the engine is cold (has not been run in a few hours) move the fast idle lever toward the rear of the
motorcycle until the lever stops.
6. Set the engine stop/run switch to the Run position.
You should hear the fuel pump momentarily as it pressurizes the fuel system.
60