06.11.2014 Views

V92TC V92TC DELUXE - Polaris

V92TC V92TC DELUXE - Polaris

V92TC V92TC DELUXE - Polaris

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Cleaning and Storage<br />

Stabilize Fuel<br />

1. Using a mixture of fuel and the amount of gasoline stabilizer recommended by the stabilizer<br />

manufacturer, fill the fuel tank only to the top of the filler insert.<br />

2. Start and run the engine for 15 minutes to pass the stabilized fuel through entire fuel -injection<br />

system.<br />

Protect Engine Components<br />

1. Change the engine oil (see “Change Engine Oil and Oil Filter” page 74). You do not need to replace<br />

the oil filter at this time, but you must replace the oil filter when you remove the motorcycle from<br />

storage.<br />

Caution<br />

Carbon deposits, normally suspended in engine oil that is in service, settle on internal engine components<br />

during storage. Settled carbon deposits can cause engine damage.<br />

2. Using pressurized air, blow any debris from the area around each spark plug.<br />

WARNING<br />

Wear face protection when using pressurized air.<br />

3. Remove the spark plugs (see “Check or Replace Spark Plugs” page 101). Pour one tablespoon of<br />

clean motor oil into each spark plug hole.<br />

121

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!