V92TC V92TC DELUXE - Polaris

Maintenance
3. Record the measurement and the locations from where the measurement is taken in the space
provided.
4. Remove the motorcycle lift apparatus and return the motorcycle to the ground.
5. Load the motorcycle with all the things you intend to carry (cargo and accessories). Sit in the
operator’s seat with your riding gear on, and if you plan on carrying a passenger, have them sit on the
passenger seat with their riding gear on.
6. Have your assistant bounce the rear suspension a few times by pushing down on the rear fender
slowly and releasing. Make sure the suspension moves freely without binding.
7. Without moving the motorcycle, have your assistant measure the distance from the center of the rear
axle to the bottom of the rear fender directly above the axle. This measurement must be taken from
the same locations recorded in step 2.
8. Subtract the second measurement (step 7) from the first
measurement (recorded in step 2). The difference is
called “sag” and should be 3/4 to 1 1/4 inch (19 to 32
mm). Adjust the shock absorber preload and recheck
the sag if necessary.
1
1. Preload Adjustment Collar
83