V92TC V92TC DELUXE - Polaris
V92TC V92TC DELUXE - Polaris
V92TC V92TC DELUXE - Polaris
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance<br />
WARNING<br />
Do not reuse a cotter pin because it may fail, allowing the wheel to loosen and you to lose control of<br />
the motorcycle.<br />
6. Pump rear brake several times to reset brake pad distance.<br />
Align Rear Wheel<br />
This procedure involves using the rear wheel alignment tool, part no. PV -43528, which is designed<br />
specifically for aligning the rear wheel. Do not rely on the rear axle reference marks for wheel alignment.<br />
WARNING<br />
A skewed rear axle can damage the drive belt, causing it to fail and you to lose control of the<br />
motorcycle.<br />
80<br />
1. Bring the motorcycle to a vertical position with an appropriate motorcycle lift or a block of wood or<br />
steel placed securely under the frame.<br />
2. Remove the swing arm pivot caps and install the rear wheel alignment tool on the right side of the<br />
motorcycle.<br />
3. Measure and record the distance from the tip of the alignment tool to the center of the rear axle.<br />
4. Install the rear wheel alignment tool on the left side of the motorcycle.<br />
5. Measure and record the distance from the base of the alignment tool to the center of the rear axle. The<br />
right side measurement and the left side measurement must be identical.